FalishaManpower

For employers · Skills & trade testing

Trade Test for Saudi Arabia: How Employers Verify Pakistani Workers’ Skills

Checked against official sources · 18 November 20267 min read

Quick answer

For Saudi Arabia, a Pakistani worker in a trade notified by Takamol must pass the Skill Verification Program (SVP) test before the work visa; NAVTTC runs it in Pakistan in 108 approved trades at USD 85 per test from 9 September 2026. For other trades and countries, employers check provincial Trade Testing Board or NAVTTC NVQF certificates and add their own practical test in Pakistan, at an approved centre or by live video.

At a glance

Saudi trade test
Skill Verification Program (SVP), mandatory only for trades notified by Takamol
Run in Pakistan by
NAVTTC with Takamol, at 44 active centres (62 in total)
SVP fee
USD 85 per test from 9 September 2026
SVP result
On the candidate’s SVP portal within 24 hours of passing
Other certificates
Provincial Trade Testing Boards (Punjab, Sindh, KP) and NAVTTC NVQF
Who verifies a certificate
The body that issued it; TTB Punjab cases then go to NAVTTC for attestation
Falisha’s role
Arranges trade tests with approved centres or the employer; never conducts them

What is the trade test for Saudi Arabia?

The trade test for Saudi Arabia is the Skill Verification Program (SVP), a skills assessment that Pakistani workers in occupations notified by Saudi Arabia’s Takamol must pass before the work visa. In Pakistan it is delivered by the National Vocational and Technical Training Commission (NAVTTC) with Takamol, and NAVTTC states it is mandatory only for those notified occupations.

  • Trades: 108 approved trades, according to NAVTTC.
  • Fee: USD 85 per test from 9 September 2026.
  • Centres: 62 test centres nationwide, of which 44 are active.
  • Result: uploaded to the candidate’s SVP portal within 24 hours of a successful assessment.
  • Registration: on the SVP International portal (svp-international.qiwa.sa; the older svp-international.pacc.sa address forwards there).

Saudi Arabia’s Ministry of Human Resources and Social Development (HRSD) runs these checks under its Professional Accreditation Program. Medium- and low-skill trades take practical and theory tests, while high-skill roles held by diploma holders go through Professional Verification, a check of certificates and experience with the bodies that issued them.

The worker’s own steps, from registration to result, are in our SVP and Takamol test guide.

Which Pakistani trade certificates can an employer rely on?

Outside the Saudi SVP, formal proof of a Pakistani worker’s skill comes from a provincial Trade Testing Board (TTB) certificate or a NAVTTC certificate under the National Vocational Qualifications Framework (NVQF). Each body vouches only for certificates it issued, so verify with the issuer.

Issuing bodyWhat it isWhere to check
Trade Testing Board Punjab, LahoreExamination body under Punjab TEVTA, set up under the National Training Ordinance 1980; certifies skilled workers at grades G-III, G-II and G-Ittbp.edu.pk: paper verification case, then NAVTTC attestation
Trade Testing Board Sindh, KarachiProvincial board that tests candidates and affiliates training institutessindhttb.gov.pk: online result search and a verification procedure
Trade Testing Board Khyber Pakhtunkhwa, PeshawarConducts trade tests and skill assessments in KP; the KP Trade Testing Board Bill 2025 was passed by the Provincial AssemblyAsk the board directly
NAVTTC (NVQF certificates)National qualifications framework with eight levelsNVQF Registry at nvqf.navttc.gov.pk
Takamol and NAVTTC (Saudi SVP)Skills test for occupations notified by TakamolThe candidate’s SVP portal account
Pakistani skill certificates and where they are checked (November 2026)

A certificate shows the candidate passed a test on a given date. It does not show recent work, so pair it with experience letters and, for key roles, your own practical test.

How do you verify a TTB or NAVTTC certificate?

You verify a Pakistani trade certificate with the board that issued it, not with the recruiting agency. Trade Testing Board Punjab’s instructions (December 2025) describe a paper process:

  1. 1Submit two copies of the application on TTB’s prescribed form.
  2. 2Attach a copy of the candidate’s CNIC, the original certificate with two photocopies, and the original fee challan with a copy.
  3. 3After TTB verifies the certificate, it is submitted to NAVTTC for attestation.

For NVQF certificates, NAVTTC directs employers to its NVQF Registry at nvqf.navttc.gov.pk. If the registry does not load, choose “Certification & Verification” on NAVTTC’s contact form or call its helpline, 0800-88866.

Whatever the route, match the name, father’s name and CNIC number on the certificate against the candidate’s CNIC and passport. Ask the candidate to bring the original certificate to the practical test.

How can an employer run a practical trade test in Pakistan?

An employer can test Pakistani candidates in person at a test centre or remotely by live video. NAVTTC’s guidance for foreign employers lists interviews and skills tests held either remotely or on site as a normal hiring step.

  • Your own assessor at a centre: your engineer or supervisor travels to Pakistan and candidates perform the tasks in your brief at a workshop with the right machines and materials.
  • An accredited assessment centre: TTB Punjab accredits institutes to act as assessment centres on its behalf, which gives a documented, standards-based result.
  • A third-party test centre: an independent centre runs your brief and returns marks, photos and video, which helps when you cannot send your own assessor.
  • Live video: suits shortlisting and trades where close filming shows the work. Ask for one continuous shot, the candidate’s CNIC on camera at the start and the finished piece shown close up.

Falisha does not conduct trade tests. We arrange trade tests with approved centres or the employer: we book the venue, schedule candidates and pass your brief and the results between both sides.

Test centres cannot give visas: On 28 September 2026 BEOE warned that trade test centres are not recruitment agencies and have no legal authority to offer foreign employment visas. Report any centre that sells jobs or visas to the FIA.

What should a trade test brief include?

A good trade test brief tells the assessor exactly what to test and how to mark it, so results from different candidates and centres can be compared. Send it before the test date so the centre can source the materials.

ItemWhat to specifyExample for a welder
Job and gradeJob title, skill level and the work done on siteStructural welder in a steel fabrication shop
TasksThe exact jobs to perform, with joint types and positionsThe joints and positions used on your site
Materials and equipmentMachines, tools, consumables and material sizesYour plate grade, thickness and electrode type
StandardThe drawing, procedure or code the work must meetYour project’s welding procedure
Pass criteriaWhat counts as a pass and who decidesVisual inspection plus any test you name
Time allowedA time limit for each taskSet per task in the brief
Theory or oral questionsSafety, drawings, measuring and toolsReading a fabrication drawing
EvidencePhotos, video, marked test pieces and signed score sheetsTest piece stamped with the candidate number
SafetyProtective equipment and rules during the testHelmet, gloves and safety shoes
LanguageLanguage for instructions and questionsUrdu or English
Checklist for an employer’s trade test brief

For trade-specific hiring, see hiring welders from Pakistan or the full list of trades you can hire from Pakistan.

Frequently asked questions

Is the trade test mandatory for every Saudi work visa?

No. NAVTTC states that skill verification is mandatory only for candidates going to Saudi Arabia in occupations notified by Takamol, and it is offered in 108 approved trades. For other occupations the employer decides how to check skills, for example through Trade Testing Board certificates, experience letters and a practical test in Pakistan.

How much is the trade test for Saudi Arabia in 2026?

NAVTTC lists the SVP fee as USD 85 per test from 9 September 2026, roughly PKR 23,500 to 24,500 depending on the exchange rate. Candidates register on the SVP International portal and sit the test at an active NAVTTC–Takamol centre. Falisha takes no unlawful fees — ask for a receipt for any payment.

How can an employer check a Pakistani trade test certificate?

Ask the body that issued it. Trade Testing Board Punjab verifies its certificates through a paper case with a CNIC copy, the original certificate and a fee challan, after which NAVTTC attests it. NAVTTC directs employers to its NVQF Registry for NVQF certificates, and Saudi SVP results sit in the candidate’s SVP portal.

Can an employer test Pakistani candidates by video?

Yes. NAVTTC’s guidance for foreign employers includes interviews and skills tests held remotely or on site. Live video suits shortlisting and trades where close filming shows the work clearly. For final selection in hands-on trades, an in-person test at a centre with the right equipment shows more.

Does Falisha conduct the trade test?

No. Falisha does not conduct trade tests. We arrange trade tests with approved centres or the employer: candidates take the test at a centre or with the employer’s own assessor, against the employer’s brief, and the results go to the employer. The Saudi SVP test is run by NAVTTC with Takamol.

What is an NVQF certificate?

NVQF is Pakistan’s National Vocational Qualifications Framework, an eight-level framework run by NAVTTC. An NVQF certificate shows the holder was assessed against national competency standards. Employers can authenticate one through NAVTTC’s NVQF Registry, or through NAVTTC’s certification and verification contact if the registry is unavailable.

How quickly are SVP results available?

NAVTTC says results and certificates are uploaded to the candidate’s SVP portal within 24 hours of a successful assessment. The candidate can then share the result with the employer, and the employer can ask the recruiting agency to attach it to the candidate’s file before the visa stage.

Official sources

Checked on 18 November 2026. Fees and procedures change, so confirm the current position on the official site before you pay anyone or travel. This guide is general information, not legal advice.

Hiring workers from Pakistan?

Send us your demand. As a BEOE-licensed promoter we handle sourcing, screening, BEOE permission, visas and departure.